PRODUCT DESCRIPTION
Introducing the Auto Detailing Business Start-Up Package: Pro, the business start-up package designed specifically for auto detailers and car enthusiasts. This starter or upgrade package includes high-quality cleaning equipment and accessories to help you achieve professional-level results. It comes with a carpet/upholstery extractor, portable steamer, 25-foot pressure washer hose, and a snow foam bottle. These tools will allow you to clean every inch of your customers' vehicles' interior and exterior with ease and efficiency. Whether you want to start your own auto detailing business or simply take your hobby to the next level, this Auto Detailing Business Package is the perfect choice for you.
Pro Auto Detailing Business Start-up Package Includes:
- Aqua Pro Vac: The Aqua Pro Vac is a powerful and versatile wet/dry vacuum cleaner that excels at removing dirt, dust, and debris from any surface. With its advanced filtration system and robust suction power, this vacuum will leave your clients' vehicles shining and spotless.
- Aqua Pro Steamer: The Aqua Pro Steamer is an advanced steam cleaning machine that utilizes the power of steam to deep clean and sanitize surfaces. Whether it's upholstery, carpets, or hard-to-reach areas, this steamer will effortlessly remove stains, odors, and bacteria, leaving a fresh and new look.
- Snow Foam Bottle: The Snow Foam Bottle is a must-have tool for any auto detailer. This bottle attaches to your pressure washer and creates a thick foam layer that clings to the vehicle's surface, loosening and lifting dirt and grime for a safer and more efficient cleaning process.
-
25ft Pressure Washer Hose: This high-quality 2610PSI pressure washer hose is a great addition to your setup. With its 3/8" connectors and durable construction, it can withstand high-pressure cleaning tasks, ensuring optimal performance and longevity.
Aqua Pro Vac Specifications
Model: | Aqua Pro Vac |
Rated voltage: | 120 volt |
Clean Water tank capacity: | 1.5 Gallons |
Wastewater tank capacity: | 2 Gallons |
Rated current: | 5.5 amps |
Motor power: | 1100 watt |
Water lift: | 79" |
Pump motor: | 50 watt |
Pump pressure: | 4 bar / 58 psi |
Flow rate: | .5 Gallon per Min |
Vacuum Hose length: | 9 Feet |
Power Cord Length: | 17 Feet |
Noise level: | 78 dB(A) |
Maximum airflow: | 1.8m³ / minute |
Dimensions: | 21" x 15" x 17" |
Weight | empty: 31 lbs |
Boxed Dimensions: | 26" x 20" x 18" |
Boxed Weight: | 36 lbs |
Aqua Pro Steamer Specifications
Model: | Aqua Pro Steamer |
Watts: | 1400W |
Steam PSI: | up to 58 PSI |
Water Tank Capacity: | 50oz |
Minutes of Continuous Steam: | 30 minutes |
Steam Hose Length: | 6 1/2 feet flexible steam hose |
Power Cord Length: | 15 1/2 feet |
Machine Weight: | 8 lbs |
Boxed weight: | 23lbs |
Warranty: | 1-year Limited Manufacturer's Warranty |
Select your state to see estimated delivery
Product highlights

Powerful Steam Output
Equipped with a robust steam engine, this steamer delivers a strong and continuous flow of steam, cutting through dirt, grease, and grime effortlessly.

Adjustable Steam Intensity
Adjust the steam's intensity to suit the task at hand, ensuring you achieve the best results without risk of damage whether you're dealing with delicate surfaces or tough grime.


Compact and Portable Design
With it's compact design, this machine is ideal for both commercial and personal use, ensures you can bring powerful steam cleaning capabilities wherever they're needed.

Multiple Attachments for Versatility
Equipped with a variety of attachments, this machine is adept at tackling a wide array of cleaning tasks and ensure no spot is left uncleaned.
The Top Uses for the Aqua Pro Vac and Steamer
CUSTOMER TESTIMONIALS
fast & free delivery
Frequently Asked Questions
Here are the steps that you should follow in descaling your machine:
- Make sure that you empty out all remaining water from the machine before starting the descaling process.
- Use around 700cc of hot or cold water, mix it with one packet of citric acid or white vinegar, and put the water into the bottle (most water calcification will precipitate on the bottom of the water tank, so 700cc is enough. Also, using hot water will get the citric acid to dissolve quickly).
- Place the bottle into the inlet of the water tank, empty the water into the machine, remove the bottle and close it with the red cap.
- Plug in your machine and push on the power switch to let it heat up and wait until the indicator light comes on (if you use hot water, the heating time should be around 5 mins, and if you use cold water, it should be around 8 mins).
- Once it’s heated, turn off the power switch and press down the red cap, using a cloth to avoid the steam, and relieve the pressure.
- Remove the red cap and empty the contents down the drain (before you remove the red cap, make sure there is no steam coming out from the machine).
- After emptying the water tank, pour clear water again into the machine to remove all calcification. You can refer to this video.
You can also take a look at this video showing the whole process of descaling.
Descale your machine regularly. We recommend every month or so.
It is very important that you use distilled water or ‘pure’ water in the machine at all times, this will prevent calcification (this is the same with all steamers).
The Aqua Pro Steamer has a rating of 120 volts.
Regarding your question about the temperature, here's the information you need to know about the Aqua Pro Steamer:
1. Water boils at 100 degrees C and at higher than 100 degrees C it turns to steam. Normally the temperature will be 95~100 degrees C at the outlet of the handle.
2. Our boiler (water tank) has a set temperature of 140 ~145 degrees C ( around 287 F), when that temperature is reached, the green indicator light will be ON and the vapor and steam pressure can reach 4 bar (50PSI).
3. The steam flows through the pipe and hose when actuated and the temperature will gradually decrease, condensing some of the vapor into water droplets by the longer pipe.
If the red cap got stuck in the machine and you can't remove it, expel all of the steam by pressing down on the cap and then allowing the tank to cool down, while pressing down on the cap turn counter-clockwise.
If this does not work, then it may be that the clutch is stuck and not releasing. In order to free the clutch you should press down firmly and several times try to turn the cap counterclockwise.
You can contact us through our contact page! We will be happy to assist you.